WCFO Communication Limited

WCFO offers the complete cabinet solutions, engineering design services, full integrated manufacturing capability on fiber connectivity application. More than 20 years’ experience and advanced equipment, which allows for the production of prototype through to the mass production. Main Capability: 

-         Integrated Cabinets 

-         ODF 

-         Fiber/Copper Patch Panels

MPO/MTP connectors utilize precision molded MT ferrules, with metal guide pins and precise housing dimensions to ensure fiber alignment when mating. The MPO/MTP can be mass terminated in combinations of 4~72 fiber cables. MPO/MTP series of trunk cable solutions provide an efficient way to install a large amount of cables quickly, yet provide high flexibility on unplug and re-use. It is especially suitable for the areas that require high density, rapid deployment and high performance.

WCFO’s fiber bragg grating reflector is a low-cost specific band reflector mounted on the optical network unit (ONU) side. It can reflect light pulses (1650 +/- 5nm) from the OTDR on the fiber line terminal (OLT) side nearly 100%, while the working bands of the passive optical network (PON) are transmitted normally.

Mini optical switch is free-space designed optical switch based on mechanism. It is widely used in OXC, OLP, COADM and so on. It features excellent optical characteristics with wide operating wavelength range, fast switch speed and low IL. Its compact structure and small volume can meet the needs of customer's various design requires. This optical switch offers a reliable and fast switching speed. It transmits, redirects or block optical signals.

Plug and Play customized Pre-Terminated Fiber Optic Assemblies are terminated with various types of connectors on in either indoor (plenum) or outdoor variations, and in 12, 24…432 1728 strand fiber counts, in Multimode OM1, OM2, OM3 and OM4 or Singlemode! A pulling eye is recommended and can be installed in factory. The pulling eye (and associated cable netting) will protect the pre-terminated ends during the pull. This product is a great time and money saver for those who need to install fiber optic cabling.

The PRIZM® LightTurn® connector is a miniature detachable connector for board mounted parallel optic modules, optimized for use with a Mechanical Optical Interface (MOI) that helps transmit collimated light between the MOI and PRIZM® LightTurn® ferrule. The connector is suitable for use across multiple applications including telecom, datacom, and the emerging high speed computercom markets.

WCFO’s  Waterproof Patch cords are designed to be used in the outdoor environment and provide many years of reliable service. The connector incorporates a bayonet system which enables quick and reliable installation even when engineers are wearing gloves. The connector with its secondary lockable ring provides extra security and reduces the opportunity for tampering. The connector type can be LC, SC, or MPO, and the length of cable can be specified. ODVA and Fullaxs housing are available.

Dense Wavelength Division Multiplexing (DWDM) allows for network flexibility and bandwidth expansion by incorporating multiple communication signals into a single optical fiber by using different wavelengths for each signal. It is the technology of choice for carriers to add services without expanding their fiber infrastructure. DWDM systems are capable to transmit up to 40 channels for long haul transmission.