The Optical Networking and Communication
Conference & Exhibition

San Diego Convention Center,
San Diego, California, USA

Tuesday, 13 March, 12:45-13:45
Theater II, Hall E
Session organized by Ethernet Alliance
 

Session Description

This exciting and interactive panel will discuss the latest developments in Ethernet that are summarized in the 2018 Ethernet Roadmap.  The 2018 Ethernet Roadmap is an updated overview of the latest Ethernet technologies that are being developed and deployed. While many people know about 400GbE being the fastest Ethernet speed being standardized, other speeds such as 2.5, 5, 25 and 50GbE have been developed for particular applications.  This panel will look at the variety of speeds and their target applications that are driving these speeds.  The roadmap will discuss the speeds as well as the timing of these speeds and the underlying technologies.
 
Free copies of the 2018 Ethernet Roadmap will be handed out to attendees.  The roadmap is full of excellent graphics that will be used in the panel presentation.
 

Moderator

David RodgersDavid Rodgers, Marketing Chair and Board Member, Ethernet Alliance; Senior Product Marketing Manager, Teledyne LeCroy, USA

David Rodgers is Senior Product Marketing Manager with Teledyne LeCroy, where he focuses on defining, designing, deploying, and marketing a broad range of high-speed serial analysis test and measurement products for Ethernet and Fibre Channel SANs and LANs. With over 30 years of computer industry experience, Rodgers represents Teledyne LeCroy Test and Measurement solutions in various protocol industry standards groups, including the Ethernet Alliance, FCIA, the PCI and NVMe special interest groups. He began his career in the test and measurement space as an original member of the USB Implementers Forum and one of the first marketers of USB protocol analyzers. He currently serves as the Ethernet Alliance Marketing Chair and as a board member for FCIA.
 

Speakers

Mark GustlinMark Gustlin, Principal System Architect, Xilinx, USA

Mark is a director of product planning at Xilinx working on next generation silicon architecture. Mark previously spent 15 years at Cisco Systems architecting networking hardware and has over 30 years in communication hardware design. Mark is an active participant in the IEEE 802.3, and has been a past editor of 100, 200, and 400GbE standards.
 
Scott KippScott Kipp, Principal Engineer, Broadcom, USA

Scott Kipp has developed Ethernet and Fibre Channel standards and worked in industry associations for 17 years at Brocade Storage Networking within Broadcom.  He was the President of the Ethernet Alliance for 6 years and is the Roadmap Chair who developed the Ethernet Roadmaps since 2014. 
 
Jeff MakiJeff Maki, Distinguished Engineer II, Juniper Networks, USA

Dr. Jeffery Maki is a Distinguished Engineer II at Juniper Networks working on cloud optics. He has a Ph.D. in Optics from The Institute of Optics, University of Rochester, Rochester, New York. He is a member of the board of directors of the Ethernet Alliance and an IEEE 802.3 Ethernet voter. In the OIF, he is PLUG Working Group Chairman and technical voter for Juniper Networks. For the Consortium for On-Board Optics (COBO), he is Vice President and Data Center Networking Working Group chairman. He is co-chairman of the 100G Lambda MSA Group and a participant in the QSFP-DD and SFP-DD MSA groups. He is an OSA and IEEE member.

Matt Traverso, Principal Engineer, Engineering, Cisco, USA


 

Sponsored by: